Dutchdam-Cento
Dutchdam BV and co-operating businesses can deliver tailor made designs for local challenges in decreasing flood risks. A Dutchdam is a robust flood defence, storage and logistics in one.
Field of application |
Built environment and infrastructure. |
Application |
In case of short lengths removable panels are used and stored in the proximity |
Material |
Aluminum extrusion to Dutchdam design in corrosion-resistant AlMg0,7Si |
Traffic load |
Range 100 kN / 20×20 cm upto EU standard, 266 kN / 20×20 cm. /x1.5 – 400kN |
Dimensions panels |
Standard length 2400×250 mm system parts. Other lengths optional. |
Length barrier |
Depends on storage facility |
Fold height |
Depends on customer’s demand |
Build up |
Easy to build up flood barrier manually (2 pers.) over long lengths. |
Hydraulic load |
Load up to 20 kN / m2 |
Storage |
In case of limited length, the dam can be stored in a cabin on site, or a garage in the immediate vicinity. |
Extra’s |
No bolts and nuts are needed. Internally mounted locking devices. |
|
Cover plates for Dutchdam-Bold / -Cento. Material galvanized steel, locked inside |
Field of application |
Built environment and infrastructure. |
Application |
In case of larger lengths the version with foundation gutter is used [see also PDF] |
Material |
Poured concrete foundation. For high traffic load a middle column cover plates is possible. |
Traffic load |
Standard up to 400kN Higher loads on demand |
Dimensions panels |
Standard length 2400×250 mm system parts. Other lengths optional. |
Length barrier |
Not limited |
Fold height |
Depends on customer’s demand |
Build up |
Operation is done manually by 2 persons. The use of a magnet tool for cover plates is possible |
Hydraulic load |
Load up to 45 kN / m2 [tested heavier] |
Storage |
In situ storage in gutter |
extra’s |
Connection with rainwater drain or lower area |
|
No bolts and nuts needed |
|
Cover plates for Dutchdam-Bold / -Cento. Material galvanized steel, locked inside |